MATHEMATICAL MODELING OF VYROASPIRATION SEPARATION OF SEED MATERIAL

Authors

  • I. Palamarchuk Tavria State Agrotechnological University
  • C. Kiurchev Tavria State Agrotechnological University
  • V. Verkholantseva Tavria State Agrotechnological University
  • O. Kolodii Tavria State Agrotechnological University

DOI:

https://doi.org/10.31734/agroengineering2018.01.172

Keywords:

fractionation, seed material, fraction, central tube, autoclaving motion, acceleration velocity, force forces

Abstract

In the developed system for the fractionation of sunflower seeds, self-oscillating motion is created at the expense of two groups of forces acting optically on the central separator pipe: the force-inducing forces and resistances that arise during the stretching and compression of the elastic elements. As a result of such interaction, the driving force of the separation process increases as a result of increasing the value of the centrifugal force in the event of the torsion of the central tube of the distributor; the conditions for splitting the seed flow into the fraction are improved.

The designed design is marked by the ease of execution and the minimal cost of upgrading. As theoretical studies have shown, all the main kinematic and energy characteristics of the dynamics of the particles of individual fractions give a clear split in numerical quantities, which creates a potential opportunity to improve the quality of the fractionation process and, accordingly, improve the similarity of the seeds and yield of sunflower.

According to the results of mathematical modeling, the splitting of trajectories of medium and heavy fractions was found to be within the range of 20...40%, which allowed to substantiate the design parameters of receiving bunkers for heavy and average fractions.

The results of mathematical modeling were obtained by mathematical analysis of the composite dependences for the trajectory of individual seeds particles, their velocity in the air flow, active and reactive forces operating in the system and energy indices, which were interpreted in analytical and graphical terms.

References

Abduev M. M. Obgruntuvannia parametriv separatora z nakhylenym povitrianym kanalom dlia rozdilennia zernovykh sumishei: avtoref. dys. … kand. tekhn. nauk. Kharkiv, 2007. 21s.

Adamchuk V. V. Mekhaniko-tekhnolohichni i tekhnichni osnovy pidvyshchennia efektyvnosti vnesennia tverdykh mineralnykh dobryv ta khimmeliorantiv: avtoref. dys. … kand. tekhn. nauk. Kyiv, 2006. 40 s.

Aerodynamichnyi separator dlia nasinnia: pat. 86300 Ukraina. № 86300; zaiavl. 21.06.2013; opubl. 25.12.2013, Biul. № 24. S. 4.

Aerodynamichnyi separator dlia nasinnia: pat. 102657 Ukraina. № 102657; zaiavl. 19.05.2015; opubl. 10.11.2015, Biul. №21. S. 4.

Bohdanov Ye. V., Kiurchev S. V. Teoretychne doslidzhennia yavyshcha rezonansu debalansnoho vibratsiinoho dozatora sypkykh materialiv. Pratsi Tavriiskoho derzhavnoho ahrotekhnolohichnoho universytetu. 2010. Vyp. 10. T. 6. S. 65– 69.

Burdo O. G., Kalinin L. G. Prikladnoe modelirovanie protsessov perenosa v tehnologicheskih sistemah. Odessa, 2008. 348 s.

Vasilenko P. M. Teoriya dvizheniya chastitsyi po sherohovatyim poverhnostyam selskohozyaystvennyih mashin. Kiev: USHA, 1960. 263 s.

Gladkov N. G. Zernoochistitelnyie mashinyi. Konstruktsiya, raschet, proektirovanie i ekspluatatsiya. Moskva: Mashgiz, 1961. 368 s.

Goryachkin V. P. Sobranie pochineniy. Moskva, 1965. T. 3. 384 s.

Zavgorodniy A. I., Sinyaeva O. V. Dvizheniya shara v vozdushnom potoke mezhdu vibriruyuschimi ploskostyami. Vibratsii v tekhnitsi ta tekhnolohiiakh. 2012. № 3(67). S. 20-27.

Zaika P. M. Teoriia silskohospodarskykh mashyn. Zernozbyralni mashyny. Kharkiv, 2004. T. 2, ch.2, kn. 2. 404 s.

Kotov V. V. Opredelenie skorosti dvizheniya zerna v vozdushnom potoke. Tehnologii i sredstva mehanizatsii polevodstva. Zernograd, 2002. S. 137–140.

Kiurchev S. V. Metodyka doslidzhennia vplyvu volohosti nasinnia soniashnyka na ratsionalnu shvydkist povitrianoho potoku v pnevmohravitatsiinomu separatori. Kyiv, 2018. Vyp. 9, t. 2. S. 139–141.

Kyurchev S. V., Kolodiy A. S. Metodika issledovaniya ratsionalnoy velichinyi skorosti vozdushnogo potoka v aspiratsionnom kanale. Aktualnyie problemyi nauchno-tehnicheskogo progressa v APK: sb. nauch. st. po materialam VIII Mezhdunar. nauch.-prakt. konf. v ramkah HH mezhdunarodnoy agropromyishlennoy vyistavki «Agrouniversal – 2013» (g. Stavropol 20 – 22 marta 2013 g.). Stavropol, 2013. S. 36–38.

Kyurchev S. V., Kolodiy A. S. Rezultatyi issledovaniya razrabotannogo separatora semena s vertikalnyim aspiratsionnyim kanalom. Motrol. Commission of Motorization and Energetics in Agriculture. 2014. Vol. 16, № 2. Р. 322–329.

Kiurchev S. V., Kolodii O. S. Analiz metodiv zbilshennia vrozhainosti silskohospodarskykh kultur ta vymohy do separuiemoho materialu. Zbirnyk naukovykh prats. Seriia: Tekhnichni nauky. Vinnytsia, 2012. Vyp. 11, t. 2 (66). S. 322–327.

Kiurchev S. V., Kolodii O. S. Bahatokryterialnyi analiz isnuiuchykh separatoriv nasinnia iz riznym robochym znariaddiam. Visnyk Kharkivskoho natsionalnoho tekhnichnoho universytetu silskoho hospodarstva im. P. Vasylenka. Seriia: tekhnichni nauky. Kharkiv, 2015. Vyp. 156. T. 1. S. 86–92.

Kiurchev S. V., Kolodii O. S. Metodyka doslidzhennia ratsionalnoho diametra patrubka postachannia nasinnia v seredyni vertykalnoho aspiratsiinoho kanalu. Pratsi Tavriiskoho derzhavnoho ahrotekhnolohichnoho universytetu. Melitopol, 2013. Vyp. 13, t. 3. S. 146-150.

Kiurchev S. V., Kolodii O. S. Rezultaty doslidzhennia ratsionalnykh rozmiriv vertykalnoho aspiratsiinoho kanalu separatora nasinnia silskohospodarskykh kultur. Visnyk Kharkivskoho natsionalnoho tekhnichnoho universytetu silskoho hospodarstva im. P. Vasylenka. Seriia: tekhnichni nauky. Kharkiv, 2014. Vyp. 148. S. 56–63.

Obladnannia skladiv. Zberihannia zerna i zernoproduktiv: navch. posib. / Ialpachyk V. F., Zahorko N. P., Skliar O. H., Kiurchev S. V. [ta in.]. Melitopol: budynok Melitop. miskoi drukarni, 2018. 293 s.

Pnevmohravitatsiinyi separator dlia nasinnia: pat. 119052 Ukraina. № 119052; zaiavl. 20.03.2017; opubl. 11.09.2017, Biul. № 17. S. 4.

Tekhnolohichni vlastyvosti syrovyny: navch. posib. / Priss O. P., Kiurchev S. V., Zhukova V. F., Hapridashvili N. A. Melitopol; Kherson, 2014. 224 s.

Tischenko L. N., Piven M. V. Issledovanie vnutrisloevogo dvizheniya chastits zernovoy smesi pri vibrotsentrobezhnom separirovanii. Kursk, 2003. S. 150-156.

Tischenko L. N., Piven M. V. K issledovaniyu dinamiki zernovogo potoka na naklonnom reshete. Pidvyshchennia nadiinosti vidnovliuiemykh detalei mashyn: Visnyk Kharkivskoho natsionalnoho tekhnichnoho universytetu silskoho hospodarstva im. P. Vasylenka. Kharkiv, 2001. Vyp. 8. T. 1. S. 198–205.

Tischenko L. N. K nelineynoy dvuhpotokovoy teorii vibrotsentrobezhnoy separatsii zernovyih smesey. Vibratsii v tehnike i tehnologiyah. 2003. № 6 (32). S. 13-17.

Scientific achievements in enviromental and life science Polish Ukrainian cooperation. Scientific monograph: collective monograph / L. Zbaravska, O. Chaikovska, O. Ovcharuk, S. Kiurchev. Kraków, 2018. Vol. 2. 141 р.

Published

2018-12-01

How to Cite

Palamarchuk І., Kiurchev С., Verkholantseva В., & Kolodii О. (2018). MATHEMATICAL MODELING OF VYROASPIRATION SEPARATION OF SEED MATERIAL. Bulletin of Lviv National Environmental University. Series Agroengineering Research, (22), 172–176. https://doi.org/10.31734/agroengineering2018.01.172

Issue

Section

MACHINES, PROCESSES AND SYSTEMS SIMULATION IN AGRO ENGINEERING